DANIEL SMITH Draw Tool
Made by Edward C. Lyons, our draw tool is handy for cutting zinc, copper or magnesium plates. To cut, draw the tool repeatedly along the plate using a straightedge as a guide. Best results are achieved by removing metal in small amounts. Once this is done, the plate can be bent and broken by placing it on the edge of a table. The draw tool can be resharpened as needed.
DANIEL SMITH Oil Relief Inks
-
Click for Options
| 
DANIEL SMITH Domestic Burnisher with Curved Tip, 6-3/4in
| 
DANIEL SMITH Burnisher & Scribe Combination
| 
DANIEL SMITH Burnt Plate Oil, Light 00, Pint
|
DANIEL SMITH Scraper and Burnisher Combination
| 
Combination Sharpening Stone, 4in x 1in Tall
| 
DANIEL SMITH Carborundum Grits (Silicon Carbide), #80 (price per pound)
| 
DANIEL SMITH Carborundum Grits (Silicon Carbide), #280 (F) (price per pound)
|
Aluminum Paint Tubes, 150ml Lined, 12-pack
| 
Stiff Tarlatan, 100% Cotton, 50in Wide (price per yard)
|